+1-877-PLAY-NOW · [email protected] · Mon-Sat 8am-9pm CT IAAPA Member 2024 EN | ES
Operator Blog

We Got a Great Price on 23 Outdoor Table Tennis Tables. We Still Lost Money on Them.

Posted on 2026-11-10 by Kojo Mensah

What We Thought Was Wrong

My job is killing fun purchases. I'm the procurement manager for a three-property commercial leisure group, and every equipment request above $1,000 sits on my desk before it becomes an order.

I've run our games-room and outdoor recreation budget—roughly $140,000 a year across table tennis, pool, and the miscellaneous fixtures nobody remembers to budget for—for six years. Since 2018 I've signed off on more than 40 equipment orders and tracked every one in a spreadsheet that I now consider my least favorite child (my accountant will confirm).

In early 2023 I audited our equipment spending for the first time properly. Between 2017 and 2023 we had bought 14 outdoor table tennis tables. Seven had been replaced. Two had been replaced twice. That's 23 units cycled through. Every single one we scrapped had not made it past its fifth summer. Average lifespan: 2.8 seasons.

Not ideal. Not acceptable, either—because I was the one who signed off on all 23.

My first reflex was simple: wrong brand. We'd been buying cheaper, lower-tier imports with lightweight aluminum frames and bargain composite tops—of course they wouldn't survive outdoors. So we switched suppliers. Same result. We tried another distributor. Roughly the same. For about six months in 2022 I genuinely believed the market was making disposable outdoor equipment and just not telling anyone.

That wasn't it. The tables were what their specs said they were. The problem was us—or more precisely, the question we were asking at the point of purchase.

What Was Actually Wrong

Three things. None of them appear on a quote. All three trace back to one failure of imagination: we were comparing sticker prices, when what we should have been comparing was the cost of owning the table for five years.

“Outdoor” Is a Weather Rating, Not a Use Rating

Here's the part nobody explains when you're comparing vendors. An “outdoor” table tennis table is one built to resist weather—aluminum-composite top instead of MDF, corrosion-coated frame, stainless or treated net hardware. All of that is real. All of that is also not the same thing as commercial use intensity.

We ran those tables seven days a week, all summer. They got rolled under a canopy at closing time (or didn't, depending on which staff member was on shift). They sat in the sun, in the rain, and under a steady stream of people leaning on them. Kids jumping on them. That's not weather resistance—that's weather resistance plus roughly a thousand users a month.

What I mean is that a 6mm top and a 12mm top can both be labeled “outdoor-grade aluminum composite” and behave like completely different products by the third summer. The distinction isn't whether the table survives June. It's whether it's still level and playable by August of year three. The spec sheet doesn't have a column for that, which is to say the buyer has to do the translation, and most buyers (us included) don't know the translation exists.

We Weren't Comparing Tables. We Were Comparing Prices.

For context: a competition-standard table has published specs. The ITTF governs playing surface dimensions (2.74 m × 1.525 m), table height (76 cm from the floor), and ball bounce (roughly 23 cm from a 30 cm drop). Those figures are defined, published, and enforced at events. There's an industry standard for what a competition table looks like.

What there is no standard for is how long an outdoor table should survive commercial use. There's no certification, no minimum durability rating, no published lifecycle. The market does not have a number for this, which is why the number doesn't appear on any spec sheet.

So we did what most buyers do: we asked which table was cheaper, ordered it, and assumed durability was a brand-quality question. It wasn't. Durability was a procurement-design question, and we hadn't designed anything.

Parts Availability Is the Real Durability Spec

This is the part I wish someone had told me in 2017.

A table tennis table almost never dies from the surface. Aluminum frames survive almost indefinitely if they aren't physically struck. What dies first is the casters. Then the leveling feet. Then the net assembly.

In 2021, two of our tables had reached a point where the original wheels had rusted enough that the tables weren't safe to roll. I called the supplier to order replacements. Answer: that model had been discontinued, and no parts were available. Two tables, at $680 each, were effectively garbage because of a wheel that would have cost $15 or $20 to replace if it existed.

Looking back, I should have asked about parts availability before I ordered. It would have been one phone call. At the time, it genuinely never occurred to me—we were thinking of the tables as one-time purchases, not assets with a maintenance curve. That was the expensive mistake.

What It Cost Us

Here's the part that made me build a spreadsheet.

Between 2017 and 2023 we spent approximately $15,640 on tables (23 units, average unit price $680). Add roughly $2,400 in labor for swaps and disposal. Total seven-year outlay: around $18,040 across 14 placement positions at our three properties.

Cost per placement-season: roughly $460.

For comparison, the commercial-grade outdoor tables we priced in Q1 2024 ran $1,400–$2,000 per unit. Buying at $1,450 and maintaining them properly would give a working life of at least eight summers (a conservative expectation for commercial-grade units). Fourteen positions would have cost about $20,900 upfront, with essentially no swap labor—because the parts that wear out can be replaced individually. Cost per placement-season: roughly $187.

A 2.5× difference, and the cheaper option left nothing in residual value.

But the money is only the half of it that shows up on a budget line. The other half is downtime.

Four to six weeks per summer, at least one table at each property was out of service. In peak season, a single table in a club setting sees 30–50 players per week. I don't have hard data on the exact revenue impact—I wish I had tracked it more carefully from the start—but the two summers with the most downtime were also the two with our weakest membership renewals. Anecdotally, the correlation looked real. I can't prove it, and I don't need to; it was enough to change how we buy.

If I could redo those seven years, I'd evaluate on five-year total ownership cost from day one and rank vendors on that number, not on the quote. But in 2017, that wasn't how anyone in our organization evaluated equipment. The first time we built a TCO sheet was 2023. It was ugly, and it was overdue.

How We Buy Them Now

Current process: any recreation equipment purchase over $1,000 requires a three-year cost model attached to the request. Parts replacement estimates, labor hours, and downtime projections. It sounds cumbersome—in practice it takes under 20 minutes to fill out—and it has killed off most of the quotes that used to look attractive on paper.

I ask three questions before any order goes through:

  • Do you have a published parts list and pricing for replaceable components? (If the answer is “let me get back to you,” the conversation is over.)
  • Which component is designed to fail first, and what does replacing it cost?
  • For our usage—___ sessions per week, ___ weeks per year—what commercial lifespan should we expect?

That third question produces silence more often than not. That's fine. The silence is the answer.

We ended up standardizing on the Cornilleau table tennis table outdoor commercial line. They got the business for two reasons: they answered the parts question directly, with a parts catalog and a price list, and their French manufacturing heritage meant the model we were buying in 2024 wouldn't quietly get discontinued in 2027 the way our previous units had.

Last year's snooker table vs pool table decision followed the same logic. We didn't argue about which game members prefer—we compared maintenance cost per hour of play. Snooker cloth and cushions take more wear per hour of use, which is manageable in a low-traffic members' room and disastrous in a public games hall. The snooker table went where foot traffic is low. The pool tables went where traffic is high. Total cost per hour of play, not sticker price.

The same three-question checklist now applies to everything in the budget: gym equipment, the headphone amp we bought for the lounge bar last year, even the replacement paddles and covers we cycle through each summer. Anything under $1,000 skips the full spreadsheet, but asking for the parts price has become reflex.

The real change isn't the policy. It's the habit: ask “what's not included” before you ask “what's the price.” That one line has saved us more than any negotiation we've ever run, and it has nothing to do with squeezing vendors. Quotes are built to answer the question the buyer asks. Ask about the sticker, you get the sticker. Ask about the total, you get the total. The buyer sets the frame.

For anyone reading this and thinking “obviously”—yes, obviously. We should have known in 2017. We didn't, because nobody trains a facilities manager to build a TCO model, and it isn't the vendor's job to teach you. The vendor's job is to sell you the thing on the quote.

Cost control isn't buying the cheapest thing on the sheet. It's buying the thing whose cost you can actually see coming.

author-avatar

Kojo Mensah

Kojo Mensah is an arcade and redemption equipment analyst covering video cabinets, claw machines, ticket games, coin pushers, pinball machines, kiddie rides, readers, dispensers, and prize systems. He applies IEC 62368-1 to relevant electronic assemblies and tracks coin acceptance, sensor accuracy, payout calibration, ticket throughput, cycle counts, power load, network latency, mean time between failures, access control, and parts replacement time. His evaluations help FEC operators, cinema chains, route operators, and technicians balance guest appeal, uptime, revenue per play, fraud resistance, service labor, and floor productivity.

Leave a Reply